If there’s one plumbing fixture that has to be reliable for a long period, then it would have to be the toilet. After all, you don’t want to go through the ordeal of dealing with a clogged toilet, do you?
There are two types of toilet according to odor seal—flushing toilet and dry. Of the two, the best flushing toilet is the most commonly used around the world. It can be hooked up easily to a home septic tank for an easy to maintain and sanitary system.
Benefits of Flushing Toilet
With the flushing toilet, you can have an odor-free bathroom. Everything that goes into the bowl is flushed right away. This is particularly the case if the toilet you bought has a powerful flushing system, taking all those waste outside of your home faster than you can imagine.
A toilet’s flushing system should also be able to clean the bowl and consequently, prevent your bathroom from smelling so bad. A flushing toilet also maintains cleanliness and sanitation in the bathroom.
The best flushing toilets only need one flush to get rid of all the waste on the bowl. It can thus keep the bowl clean and hygienic without you having to scrub it to remove leftover waste particles frequently.
Finally, a good flushing toilet won’t make you worry about waste staying put, going back or clogging the toilet. One flush should be robust and sufficient enough to remove all those litter.
10 Best Flushing Toilets – Comparison
Here are 10 of the top flushing toilets which you may want to consider if you are renovating your house, building a new one, or simply bent on replacing your current toilet:
|Picture||Product Name||Flush Type||Water Consumption||Price|
|TOTO CST744SG#01 Drake 2-Piece Toilet||G-Max||1.6 GPF||Check Latest Price|
|American Standard 2403.128.020 Compact||Cadet 3||1.28 GPF||Check Latest Price|
|American Standard 2315.228.020 Baby Toilet||Power Flush||1.28 GPF||Check Latest Price|
|TOTO CST244EF#01 Entrada Elongated Toilet||Siphon Jet||1.28 GPF||Check Latest Price|
|American Standard 221CA.004.020 Colony Toilet||Dual Flush||1.6 GPF||Check Latest Price|
|American Standard 221DA.104.020 Colony Toilet||Dual Flush||1.28 GPF||Check Latest Price|
|American Standard 2886218.020 H2Option||gravity flush||1.28 GPF||Check Latest Price|
|Danze DC011323WH Orrington 1-Piece||Gravity Flush||1.28 GPF||Check Latest Price|
|Toto CST243EF-01 Entrada 1.28GPF Round||Siphon Jet||1.28 GPF||Check Latest Price|
|EAGO TB351 Dual Flush Eco-Friendly Ceramic Toilet||Dual Flush||1.6 GPF||Check Latest Price|
Top 10 Flushing Toilets – Review
1. TOTO CST744SG#01 Drake Toilet 2-Piece
Toto is one of the most recognizable brands when it comes to toilets. TOTO CST744SG#01 Toilet has a modern, high profile design.
It has a wide, 3-inch flush valve that is larger than the conventional 2-inch flush valve. It is also equipped with a G-Max flushing system for powerful yet quiet flushing performance.
The toilet bowl has a 2.125-inch trap way that is fully glazed and computer design. It measures 28 x 19.5 x 28.5 inches (height x width x depth).
There are many options to like about this toilet. Its G-Max flushing system is so impressive and powerful that you only need to quickly push the handle to activate it; no need to handle it for a few seconds to flush down your litter.
It has one of the highest pressure flushes among the most popular toilet brands. The flush is relatively quiet although not the quietest in the world. With its Sanagloss coating, the toilet looks really clean even after years of use.
It is also designed to resist sticking:
Its minimum flush is quick that the reservoir will be replenished quickly as well, users say the cycle can be completed in less than 15 seconds. The replacement parts are readily available and reasonably priced, too. The minimum flush is strong enough to flush everything that you dump on it.
It is very easy to clean. Despite the large flush valve, it still uses 1.5 gallons of water each flush. Finally, the toilet e looks good and can make your bathroom look stylish. But there are some downsides.
The Sanagloss glaze may look good but it doesn’t extend below the rim, so there’s the chance that that part of the toilet will get really soiled and sticky. Hard water can easily destroy the Sanagloss glaze coating.
2. American Standard 2403.128.020 Compact
American Standard 2403.128.020 Compact Cadet-3 FloWise One-Piece Toilet has a rim that is about 17 inches above the ground, so it’s a good choice for most users looking for a comfortable potty.
It has an EverClean surface which inhibits growth of stain and odor around the bowl. And it is also very economical when it comes to the use of water, needing just 1.28 gallons of water to move your waste.
We love the powerful siphon jet that assists every flush and ensures that everything on the bowl is removed. The tank is also fast to refill, and it uses minimal amount of water for every flush.
The three- inch valve facilitates more powerful flushes, too. And there’s a special surface that inhibits stain growth around the bowl. The only real downside is that it is noisy during flushing.
3. American Standard 2315.228.020 Baby Toilet
American Standard 2315.228.020 Baby Devoro Flowise is a toilet that is specifically made for kids and smaller adults. It has a 10-inch-high rim that makes it a lot smoother for the vertically challenged to get on and off it.
It is also very efficient in water usage, giving you the option to use a flush of 1.28 gallons for removing waste, or 1.1 gallons for liquid waste. The full flush however gives you a generous 1.6 liters of water so even the most stubborn of waste won’t go back up.
We liked that this is an excellent potty for children. It has good flushing power, and gives users the option to choose a flush depending on the waste that needs to be moved. It is also easy to install.
It just doesn’t come with a lid and wax ring. Some quality issues reported by users include flappers that won’t work and leaking.
4. TOTO CST244EF#01 Entrada Elongated Toilet
If you desire a toilet that is economical in water use, then this Toto Entrada elongated toilet ought to be in your shortlist.
It only uses 1.28 gallons per flush, giving you up to 20 percent water savings compared to other toilet products. It utilizes TOTO’s G-Max flushing system to ensure powerful flushes without consuming a lot of water.
It also has few moving parts, so DIY repair shouldn’t be a problem just in case something wrong happens. It has wide 3 inch flush valves, too, that facilitate quick and consistent flush. It has a large 2.125-inch tramway for optimal waste passage.
This is one of the cheapest toilets in TOTO’s line-up. Despite being cheap, you are assured of the quality/performance of the elongated toilet.It has a very minimalist design/look, making your bathroom appear bigger. It can help you minimize your water consumption, translating to lower bills.
The seat is also comfortable to sit on. There’s some noise when flushing but it is bearable especially when compared to other TOTO toilets.
We just didn’t like that it has a non adjustable flush valve. And dome tall people complain that this is a bit low for them.
5. American Standard 221CA.004.020 Colony Toilet
American Standard 221CA.004.020 Colony 12-Inch Toilet has dimensions of 29.8 x 19.2 x 29.4 inches. It is made of durable vitreous china construction and with a siphon action bowl.
It has a 2-inch flapper flush valve that is designed to perform well for years. It has a space-saving design that should make it a smart choice for compact bathrooms. It is also very economical in water usage, utilizing around 1.6 gallons of water for every flush.
Its 2-inch trapway can move large amounts of bulk material without clogging. Finally, it has a generous water surface area. We like that it is well designed, with a contemporary low profile and thus should complement the look of your toilet.
It is relatively easy to install and comes from a reputable brand. It is very reasonably priced. It flushes immediately, and the tank refills quickly as well.
Its power wash rim scrubs the bowl with each flush. And the trapway is designed to move lots of litter without clogging. There’s a generous water surface area means less cleaning on your part. And it has a small footprint; doesn’t take up very big space in the toilet.
Negative side? It doesn’t come with a toilet seat/wax gasket. And the overflow pipe was a bit short, leading to low water volume.
6. American Standard 221DA.104.020 Colony Toilet
American Standard 221DA.104.020 Colony 12-Inch Toilet is another excellent choice if you are in the market for a very frugal toilet. It makes use of just 1.28 gallons of water for every flush.
The flushing power is not compromised despite you’d surely enjoy a lot of savings on your water bills when you have this 12-inch toilet combo installed.
Aside from the water savings, there are other good reasons to replace your old toilet with this American Standard unit. It’s relatively easy to install, it has a contemporary design and it has a very good flushing power.
We like that it is easy to install. The tank refills very quickly. Since it is economical in water use, you won’t be wasting a lot of water flushing down urine. It has a contemporary looking, round design. It is reasonably priced compared to other American Standard toilet units. And it comes from a reputable brand. The flushing action, though, is a bit noisy. Some reviewers .com complain that this doesn’t flush very well.
It has negative side too:
It does not come with a toilet seat. And it’s a bit low, so tall people may find sitting on this one very uncomfortable.
7. American Standard 2886218.020 H2Option
American Standard 2886218.020 H2Option Siphonic Dual Flush Right Height Elongated Toilet is a good choice when you are looking for a toilet with a rim that sits higher off the ground.
Its’ rim height is 16.5 inches above the ground, that makes it ideal for use of tall people. It is also a water-efficient flushing toilet that relies on gravity to move waste down to the drain. It also gives you the choice of using a partial flush for removing liquid waste, and a full flush for solid waste.
There are lots to love about this toilet. It is economical in terms of water use, with a full flush using just 1.28 gallons of water. The partial flush uses 0.98 gallons of water. It has an elongated toilet design that ensures comfort for most users.
Flushing is very quiet; you won’t hear it when you are outside the bathroom. And with its slim profile, it’s a good choice when your bathroom is small. But some reviewers note that there is a very small difference in the amount of water used in partial and full flushes. And it is a bit heavy and bulky; you’ll need help in moving it during installation.
8.Danze DC011323WH Orrington 1-Piece Toilet
As the name suggests, Danze DC011323WH Orrington is a very efficient toilet that doesn’t need a lot of water to remove waste from the bowl.
This one-piece toilet has an elongated bowl with a 16.5-inch height and 12 inch rough in. It only uses 1.28 gallons of water for every flush.
With a three-inch flush valve, this Danze toilet can also give a powerful flush that should be enough to get rid of everything you dropped on the bowl. It has a soft-close seat so slamming the lid hard will not be possible with this toilet.
We like that it is tall enough for most users to sit comfortably on it. It is very economical in water consumption. The smooth sides make the bowl very easy to clean.
9. Toto CST243EF-01 Entrada 1.28GPF Round
Toto CST243EF-01 Entrada 1.28GPF Round is another reasonably priced toilet from TOOT. It has a rim that stands nearly 17 inches. It has wide, 3 inch flush valves for more powerful flushes. It also uses just 1.28 gallons of water for every flush.
We liked that it is very economical and organized in the use of water. The 3 inch flush valves ensure that you’ll get powerful flushes. And it is a bit tall and thus comfortable for most users.
This is also very cheap especially when compared to other TOTO toilets. The tank is small and thus makes the toilet look compact. Its small footprint is ideal for small bathrooms.
Plus, the tank refills very quickly. But some reviewers say the standard flush isn’t enough to remove some solid waste. And it is a bit expensive.
10. EAGO TB351 Dual Flush Eco-Friendly Ceramic Toilet
EAGO TB351 Dual Flush is a one-piece toilet which is eco-friendly because it gives you the option to choose a flush to eliminate waste. You can press a button for flushing solid waste, with the toilet using 1.6 gallons per flush to effectively remove the waste. If you just urinated, you can opt for a less powerful flush using just 0.8 gallons of water.
It has a soft closing toilet seat and lid, and a 3 inch flushing valve. The latter not only assures powerful flushes but also virtually eliminates the chances of problems that typically befell ball-chain flapper systems.
This toilet has a wide water surface designed to keep the odors down, and allow for ease in cleaning. It is relatively quiet during flushes. The Dual flush technology lets you save on water usage and translates to lower water bills.
The one-piece design is easier to clean. It also has a small footprint.
But you can’t install a bidet spray on this toilet. And the plastic mounts look cheap. Then there are the durability issues—some reviewers say the seat is easy to break/get damaged.
These are 10 of the top flushing toilets that you can find on the market today. Choose one which suits your needs best and you won’t have to fear anymore about plumbing and hygiene issues every time you step into the bathroom.
Buying The Best Flushing Toilet – Considerations
With the many toilets you can find on the market, how do you select the best plumbing fixture for your bathroom?
You can do so by considering the following factors:
1. Flush Type
There are actually two types of flush:
1. Gravity flush
2. Pressure assist
The gravity flush toilet has a flush valve that depends on gravity to move the waste from the bowl down the train. Water coming from the tank goes into the bowl to eliminate urine and feces and move these down the drain.
Flush valve measurement can range from 2 inch to 4 inch. More beefy flush valves, or those measuring 3 and 4 inches can deliver more powerful flushes. Gravity flush toilets are not only powerful but also flush more quietly compared to pressure assist toilets.
On the other hand, pressure-assisted toilets depend on pressure to move waste down the drain. It has a sealed tank which creates pressure powerful enough to eliminate of the waste. It’s a good choice if you have a large household but the one thing you’ll have to get used to is the noisy flush.
Your home must also have a minimum water pressure of 25 pounds per square inch to be able to have pressure assisted flushing toilets. You can use a gauge connecting to an outdoor spigot to determine your bathroom’s water pressure.
Pressure-assisted flushing toilets can remove solid waste very efficiently, although its flushes are very noisy. Moreover, you’ll have to shell out more money if you get this type of toilet.
2. Water Usage
For most homeowners, this is perhaps their main concern when shopping for a flushing toilet. Toilets flush are said to use as much as 30 percent of residential water in US homes.
It’s not shocking why many homeowners want a water-saving toilet.
The standard water use per flush in the US is 1.6 gallons. However, if you are serious about cutting down your water then look for a unit that uses 1.28 gallons per flush.
The most common design of flushing toilets is the two-piece model. It has a separate tank from where the water comes and straight into the bowl.
It is a more affordable option than the one-piece design. But the downside is that it is more challenging to clean, especially with the seam between the bowl and tank trapping grime.
While only 20 percent of flushing toilets in the market are of the one-piece design, this is a good choice if you desire a toilet that’s easy to clean. It is also easier to install as there is no need to attach the tank to the bowl.
One-piece flushing toilets also have a smaller profile:
But then again you will be hard pressed to find a one-piece flushing toilet that may address your needs because of the limited number of models available in the market.
Also, one-piece flushing toilets are expensive.
4. Bowl Shape
Since you’ll be spending a lot of time sitting on the throne, you might as well choose a very comfortable toilet.
An elongated bowl is more comfortable for most users, aside from giving them more seating room. But it takes up more room than the round bowl type.
5. Noise Level
A good flushing toilet should not have a noisy flush.
It’s particularly true when the bathroom is placed near the kitchen or a living area, as you don’t want to broadcast every flush. Thus a toilet with a relatively quiet flush is a great choice for small homes.
6. Flush Technology
The classic single flush is still used in most homes as toilets using this flush technology are cheaper. But you could end up saving more in the long run if you buy a toilet with a dual flush technology.
Toilets with this flushing technology have two buttons on the tank, allowing you to choose a partial flush for removing urine or a full flush for moving solid waste to the drain.
Most standard toilets have a rim that stands about 14 inches above the floor. But if you are particularly tall, a toilet which has a rim standing 17 to 19 inches high is a good choice as it would make it easier for you to get on and off.
Around 9 out of 10 buyers still go with white, although more and more models are now available in different colors like blue and green.
Picking toilets in exotic hues may be hip today, but those colors will eventually go out of fashion and leave your bathroom to look old-fashioned.